Elite Epoxy Fort Myers has served Fort Myers since 2016, installing durable epoxy and polyaspartic floor systems for garages, shops, and commercial spaces. We specialize in full-flake broadcast floors, polyaspartic topcoats, metallic epoxy floors, concrete grinding and surface prep, and moisture-mitigating primers for problem slabs. You get a free written estimate, clean prep with professional diamond grinding, and a finish built for long-term wear, chemical resistance, and easy cleaning.
Elite Epoxy Fort Myers has served Fort Myers since 2016, delivering resinous floor systems for garages, shops, and commercial interiors. We install epoxy base coats, full-flake broadcast systems, quartz blends, metallic epoxy, and clear polyaspartic or aliphatic urethane topcoats.
Each system is selected for the job, including chemical resistance for oil and brake fluid, abrasion resistance for daily traffic, and UV stability for brighter spaces. Options include satin to high-gloss finishes and traction additives like aluminum oxide where slip resistance matters.
We start with mechanical prep using diamond grinding and HEPA dust control, then repair cracks and spalls with epoxy mortar, epoxy gel, or polyurea depending on movement and depth. This creates a consistent concrete surface profile (CSP) so primers and epoxy can bond properly.
Coatings are applied to manufacturer recoat windows and target film build, then protected with a durable clear topcoat. We finish with clean cut lines at edges, careful detailing around stem walls and control joints, and a walkthrough that covers cure times for foot traffic and vehicles.
Our Services
A properly installed epoxy garage floor should not hot-tire peel, chalk, or stain after the first rainy season. Elite Epoxy Fort Myers has served Fort Myers since 2016, installing and repairing garage floor systems built on tested surface prep, moisture control, and abrasion-resistant topcoats.
Learn More
Metallic epoxy flooring turns plain concrete into a seamless, high-gloss floor with depth, movement, and color that looks custom because it is. Elite Epoxy Fort Myers has served Fort Myers since 2016, installing and repairing metallic epoxy systems for garages, showrooms, lobbies, and man caves with clean edges and consistent swirl patterns.
Learn More
Flake epoxy flooring is a tough, slip-resistant upgrade for garages, shops, and commercial spaces when it is installed on properly prepared concrete. Elite Epoxy Fort Myers has served Fort Myers since 2016, installing and repairing full broadcast flake systems for floors that need better traction, easier cleaning, and a clean, uniform look.
Learn More
A basement floor has to handle moisture, hydrostatic pressure, and constant temperature swings, and paint will not last. Elite Epoxy Fort Myers has served Fort Myers since 2016, installing and repairing epoxy basement floor systems built on real surface prep, moisture testing, and industrial-grade resins.
Learn More
A laundry room needs a floor that shrugs off detergent, moisture, and appliance vibration. Elite Epoxy Fort Myers installs and repairs epoxy laundry room floor systems in Fort Myers with clean edges, reliable drainage control, and easy-to-wipe finishes.
Learn More
An epoxy mudroom floor keeps grit, wet shoes, pet traffic, and spills from turning your entry into a stained, slippery mess. Elite Epoxy Fort Myers has served Fort Myers since 2016, installing and repairing entryway and mudroom epoxy systems built for daily abuse and easy cleaning.
Learn MoreTell us the space, square footage, and how you use it (parking, forklifts, pool chemicals, foot traffic). We help you choose epoxy vs polyaspartic based on timeline, budget, and exposure.
We check for moisture vapor, previous coatings, cracks, and slab condition, then recommend the right primer and topcoat. You receive a written estimate with coating system, prep plan, and schedule.
We grind, vacuum, patch, coat, and topcoat with controlled recoat windows, then review sheen, coverage, and traction. You get cure-time guidance for foot traffic and vehicles, plus simple cleaning and maintenance tips.
Why Fort Myers Chooses Us
Experienced, licensed epoxy contractors delivering durable results for every home and business across Fort Myers.
You get clear scope, product options (epoxy, polyaspartic, urethane), and a written estimate before work starts. We stay transparent on cure times, slip-resistance additives, and realistic maintenance.
We profile concrete with diamond grinding (not acid etching) and repair spalls and cracks with epoxy gel or polyurea. Proper CSP surface profile, clean edges, and tight detail work reduce peeling and hot-tire pickup.
We install broadcast flake floors, quartz blends, and metallic epoxies with UV-stable polyaspartic or urethane topcoats. Expect strong abrasion resistance, chemical resistance (oil, brake fluid, cleaners), and easier mop-and-go upkeep.
Elite Epoxy Fort Myers serves Fort Myers and 8 surrounding communities including Cape Coral, North Fort Myers, Fort Myers Beach. We typically respond to new project requests within one business day and can often schedule estimates the same week.
Elite Epoxy Fort Myers installs resinous floor coatings for residential and commercial concrete, including epoxy base coats, full-flake broadcast, quartz systems, metallic epoxy, and UV-stable polyaspartic topcoats.
Our work is built around surface prep and correct film build, not shortcuts. That means diamond grinding, crack and spall repair, edge detailing, and primers matched to the slab so the coating bonds and stays down.
Concrete in Fort Myers and surrounding coastal areas often holds moisture, especially in rainy season and on older slabs. When moisture vapor transmission is high, we use moisture-mitigating epoxy primers and detail joints and cracks so the system performs instead of blistering or delaminating.
For sun-exposed entries and bright garages, we commonly finish with UV-stable polyaspartic or aliphatic urethane to reduce ambering and chalking. We can also add aluminum oxide or polymer grit for better slip resistance in wet conditions.
Homeowners hire us for garage epoxy floors, patio and lanai coatings, pool-deck coatings, and concrete resurfacing where the slab is sound but worn. Popular looks include full-flake in 1/4-inch broadcast, solid-color epoxy, and metallic epoxy with a high-gloss clear.
Businesses rely on us for shop floors, warehouses, back-of-house kitchens, auto bays, showrooms, and light industrial areas. We can build systems for abrasion, impact, and chemical exposure, including thicker builds, cove base options, and scheduled work to reduce downtime.
We serve Fort Myers, FL and nearby Southwest Florida communities including Cape Coral, North Fort Myers, Punta Gorda, Estero, Bonita Springs, Lehigh Acres, Sanibel, and Naples.
If you are outside these areas, send the address and a few photos of the concrete. We will confirm travel availability and provide a written estimate based on slab condition, prep requirements, and coating system.
Epoxy is a strong base coat with great adhesion and build, ideal for flakes, quartz, and metallic designs. Polyaspartic is often used as a fast-curing, UV-stable topcoat, and it is a good choice when you need quicker return to service and better color stability.
Most failures come from poor bond to the concrete, not the coating itself. Diamond grinding creates the right concrete surface profile (CSP) and removes weak laitance, sealers, and contaminants so primers and epoxy can mechanically bond.
Hot-tire pickup is typically caused by inadequate prep, low-solids coatings, or curing issues. A properly prepped slab, quality epoxy base, and a tough topcoat (polyaspartic or urethane) greatly reduces the risk.
Hairline cracks can be filled and minimized, but concrete can still move. We route and fill cracks with epoxy gel or polyurea and recommend joint strategies when needed, but no coating can permanently stop active structural movement.
Additives like aluminum oxide, polymer grit, or textured broadcast can increase traction. The right approach depends on where the floor is used, since more texture can hold dirt and slightly reduce gloss.
Dry dust mop or vacuum grit regularly, then damp mop with a pH-neutral cleaner. Avoid harsh acids and leave degreasers on only as directed, and place pads under kickstands or heavy point loads to prevent gouging.
Most garage floors are completed in 1-2 days depending on prep, repairs, and the coating system. Cure times vary, but many polyaspartic topcoats allow faster return to service than epoxy alone.
Sometimes, but we have to verify adhesion and compatibility first. We typically grind to remove weak layers and create a bondable surface, then prime and recoat with a compatible epoxy or polyaspartic system.
Yes, metallic epoxy is available for showpiece interiors, offices, and retail areas where a high-gloss decorative look is the priority. We finish with a clear protective topcoat and can add traction where needed.
Moisture vapor can cause bubbling, whitening, or delamination. We evaluate the slab and, when needed, install a moisture-mitigating epoxy primer designed to handle elevated vapor transmission before building the coating system.
Some products have noticeable odor, especially certain solvents and fast-cure resins. We select products based on the space and ventilation, and we communicate what to expect before the job starts.
If you're planning a epoxy project in Fort Myers, working with a dependable local contractor makes all the difference. We provide residential and commercial epoxy services focused on proper preparation, clear communication, and long-term performance. Whether you need a new installation or repairs to existing epoxy, our team is ready to help. Each project is evaluated based on site conditions, usage needs, and local requirements to ensure dependable results. If you're ready to discuss your project or need more information, reach out today and speak directly with our team.
