Residential · Fort Myers, FL
Metallic epoxy flooring turns plain concrete into a seamless, high-gloss floor with depth, movement, and color that looks custom because it is. Elite Epoxy Fort Myers has served Fort Myers since 2016, installing and repairing metallic epoxy systems for garages, showrooms, lobbies, and man caves with clean edges and consistent swirl patterns.
Great metallic epoxy starts with the base, not the pigment. We diamond-grind concrete with HEPA dust control, check slab flatness, and test for moisture vapor transmission so the system bonds instead of peeling. Cracks and spalls get routed, cleaned, and repaired with epoxy crack filler or polymer-modified patch, then we apply a primer and a 100 percent solids epoxy base coat at the right mil thickness for build and coverage. If the slab shows oil contamination or weak paste, we address it before coating so the metallic layer has a stable, uniform canvas.
Southwest Florida humidity and temperature swings can change cure windows and gloss, so we plan installs around dew point and ventilation, not guesswork. Metallic pigments are blended into a clear epoxy and poured, then we use squeegees, rollers, and spiked shoes to create controlled movement without roller lines or dead spots. For slip resistance, we can broadcast aluminum oxide or polymer grit into the clear topcoat, then backroll for an even texture that still cleans easily. Final protection comes from a UV-stable polyaspartic or polyurethane clear coat to reduce yellowing, improve scratch resistance, and lock in that wet-look finish.
Fort Myers customers choose us because metallic epoxy flooring is not a one-coat paint job, it is a system with real surface prep and tight process control. You get straightforward options on color, swirl intensity, sheen level, and traction, plus clear expectations on cure times and return-to-service for foot traffic and vehicles. Our crews show up with commercial grinders, calibrated mixing, and clean masking so transitions at walls, drains, and door thresholds look intentional. When a floor needs repair, we focus on cause, not cosmetics, addressing moisture, hot-tire pickup, delamination, or topcoat wear before we blend the finish.
At the walkthrough we verify uniform gloss, edge detail, and the metallic pattern under normal lighting, then note any touch-ups before final sign-off. You receive a written scope, product system details (primer, base, metallic coat, clear topcoat), and care instructions for mopping, chemical spills, and furniture pads. We also explain what to expect over time, including how to refresh the clear coat to keep the floor looking new without a full redo. If you are comparing bids, we are happy to provide a free written estimate that spells out prep method, coating thickness, and warranty terms in plain English.
Most garage floors are completed in 1-2 days depending on prep, repairs, and the coating system. Cure times vary, but many polyaspartic topcoats allow faster return to service than epoxy alone.
Sometimes, but we have to verify adhesion and compatibility first. We typically grind to remove weak layers and create a bondable surface, then prime and recoat with a compatible epoxy or polyaspartic system.
Yes, metallic epoxy is available for showpiece interiors, offices, and retail areas where a high-gloss decorative look is the priority. We finish with a clear protective topcoat and can add traction where needed.
Moisture vapor can cause bubbling, whitening, or delamination. We evaluate the slab and, when needed, install a moisture-mitigating epoxy primer designed to handle elevated vapor transmission before building the coating system.
Some products have noticeable odor, especially certain solvents and fast-cure resins. We select products based on the space and ventilation, and we communicate what to expect before the job starts.
Metallic epoxy flooring is a multi-layer resin system that creates a seamless, reflective surface with a 3D, marbled look using mica-based metallic pigments suspended in clear epoxy. When it is installed over properly prepared concrete, the result is a durable floor for garages, retail spaces, restaurants, offices, and residential interiors where you want a high-end finish that is still easy to maintain. Elite Epoxy Fort Myers installs and repairs metallic epoxy systems designed for Florida conditions, with the right prep, moisture checks, and UV-stable clear coats.
A metallic epoxy floor is only as good as the substrate. We start by mechanically profiling the slab (not acid etching), then repair cracks, pop-outs, and joints so they do not telegraph through the finish. After priming, we apply the pigmented base coat to control color depth, followed by the metallic epoxy layer where the visual effect is created with squeegee and roller techniques. The last step is a clear protective topcoat that adds chemical resistance and wear protection for foot traffic, rolling carts, and light vehicle use.
Repair work varies by failure mode. If the issue is topcoat wear, minor scratches, or loss of gloss, we can clean, abrade, and recoat. If you have peeling, fisheyes, or hot-tire pickup, we identify contamination, moisture, or inadequate prep, then remove failed areas and rebuild the system so the repair blends with surrounding metallic movement as closely as possible.
For best results, plan for a clean, controlled install window and realistic cure times based on humidity. If you want a floor that stands out, cleans fast, and is built on real prep and proven resin chemistry, request a free written estimate for metallic epoxy flooring in Fort Myers.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Fort Myers. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
